Easy Installation Guide

Watch this VIDEO for simple installation instructions

The Aqua Nest Drinking Water System is designed for a simple under-sink installation using your existing cold-water supply. 

Before You Begin

Please review all included components and instructions before starting. Clear the area beneath your sink and have a towel or small container nearby to catch any remaining water.

Step 1: Turn Off the Water

Locate the cold-water shutoff valve beneath your sink and turn it completely off. Turn on the cold-water faucet briefly to release any remaining pressure in the line.

Step 2: Connect the Aqua Nest System

Follow the included connection diagram to attach the Aqua Nest system to the cold-water supply line using the provided installation components. Make sure each connection is properly aligned and securely tightened.

Do not overtighten the fittings.

Step 3: Position the System

Place the Aqua Nest system upright beneath the sink in an accessible location. Allow enough space around the system for future filter replacements.

Step 4: Restore the Water Supply

Slowly turn the cold-water supply back on. Carefully inspect every connection for leaks. If you notice moisture, turn off the water and check the affected connection before continuing.

Step 5: Flush the Filter

Run cold water through the system according to the flushing instructions included with your Aqua Nest filter. This removes loose filtration media and prepares the system for use.

Your Aqua Nest system is now ready to deliver cleaner, safer, better-tasting water directly from your tap.

Need Assistance?

The Waterbird team is here to help. Call 833-756-7675 or email contact@waterbirdhomesolutions.com with installation questions.

Important: Installation requirements may vary depending on your home’s plumbing configuration. Always follow the complete instructions included with your Aqua Nest system.